[kwlug-disc] Server Parts for DL380G6

[Chris Craig]

They're typically called ATX (female in this case). You can get the
connectors themselves nice and cheap: https://mod-one.com/connectors/

On 1 March 2018 at 13:38, Colin Mackay <zixiekat at gmail.com> wrote:
> Dumb question, but these power cables... what is the name for that style of
> connector?
>
> https://owncloud.floof.ca/owncloud/index.php/s/urGuQ3MYIXefZrd
>
> If I have two of the short ones, how hard is it to take apart?  I know I
> could cut the cables and solder as well, but it wouldn't look as nice. :)
>
> On Thu, Mar 1, 2018 at 1:16 PM, Colin Mackay <zixiekat at gmail.com> wrote:
>>
>> I have two of those.  Even if I were to find a barrel connector I'd need
>> three of those to reach.
>>
>> I need the long one for the second (right side) SFF cage.
>>
>> On Thu, Mar 1, 2018 at 12:33 PM, Chris Craig <kwlug.org at ciotog.net> wrote:
>>>
>>> Does it have to be 514217-001? 496070-001 is the same but shorter and
>>> seems to be much more readily available.
>>>
>>> On 1 March 2018 at 12:25, Ron Singh <ronsingh149 at gmail.com> wrote:
>>> > I have had great luck getting oddball cables/connectors from Orion
>>> > Electronics. See:
>>> > http://www.oo5.com/orion/
>>> >
>>> > Alternatively, Bauer Systems in Burlington might be useful, see:
>>> > http://www.bauersystems.com/
>>> >
>>> > Either way, a pretty pic like this:
>>> >
>>> > https://www.aliexpress.com/item/For-HP-DL380G6G7-430mm-514217-001-463184-001-HP-Hard-Drive-Server-BackPlane-Power-Cable/32733134242.html
>>> > might help the vendor know if they have something for you.
>>> >
>>> > Hope this helps.
>>> >
>>> >
>>> >
>>> > Thanks,
>>> >
>>> > Ron Singh
>>> >
>>> >
>>> > On Thu, Mar 1, 2018 at 10:45 AM, Colin Mackay <zixiekat at gmail.com>
>>> > wrote:
>>> >>
>>> >> Good day,
>>> >>
>>> >> I run ESXi on a DL380G6, with 8 Ubuntu VM's.  It's been great
>>> >> virtualizing
>>> >> everything. :)  I'm using all 8 available SFF slots and I was hoping
>>> >> to
>>> >> expand the server with another 8 drive slots so I can migrate data
>>> >> when I
>>> >> upgrade drives, etc...
>>> >>
>>> >> I have the cage, the SAS cables and another SAS controller, however I
>>> >> need
>>> >> a power cable.  A silly little 43cm 10pin to 10pin power cable.
>>> >>
>>> >> I can find eBay stores that want to charge hundreds of dollars, or
>>> >> cheap
>>> >> ones from China that might arrive by May.
>>> >>
>>> >> Anyone know a local place that might have one?  Heck a Toronto place
>>> >> is
>>> >> fine too.
>>> >>
>>> >> Part # 514217-001
>>> >>
>>> >> _______________________________________________
>>> >> kwlug-disc mailing list
>>> >> kwlug-disc at kwlug.org
>>> >> http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org
>>> >>
>>> >
>>> >
>>> > _______________________________________________
>>> > kwlug-disc mailing list
>>> > kwlug-disc at kwlug.org
>>> > http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org
>>> >
>>>
>>> _______________________________________________
>>> kwlug-disc mailing list
>>> kwlug-disc at kwlug.org
>>> http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org
>>
>>
>
>
> _______________________________________________
> kwlug-disc mailing list
> kwlug-disc at kwlug.org
> http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org
>