[kwlug-disc] Adding storage to a rack mount server

CrankyOldBugger crankyoldbugger at gmail.com
Fri Sep 15 10:49:18 EDT 2017


Just remember, WD40 is for the stuff that should move but doesn't, Duct
tape is for the stuff that is moving but shouldn't!


On Fri, 15 Sep 2017 at 10:26 Colin Mackay <zixiekat at gmail.com> wrote:

> That may be a possibility.  I may be able to tie them down with a bit of
> creative zip tie-ing. :)
>
> On Thu, Sep 14, 2017 at 10:12 PM, William Park via kwlug-disc <
> kwlug-disc at kwlug.org> wrote:
>
>> If you don't have problem with appearance and handling, then get
>> SATA/power extension cable out from the 2.5" bays, and plug your 3.5"
>> harddisks.
>> --
>> William Park <opengeometry at yahoo.ca>
>>
>> On Thu, Sep 14, 2017 at 10:41:14AM -0400, Colin Mackay wrote:
>> > At the moment all my KODI shares are on the 'desktop' server, all
>> stored on
>> > a single USB drive with no redundancy.  *slaps hand*  Bad.
>> >
>> > I really wanna get away from *this* desktop doing anything important.
>> >
>> > On Thu, Sep 14, 2017 at 9:35 AM, Charles McColm <
>> > charlesm at theworkingcentre.org> wrote:
>> >
>> > > I did this for about a year with our KODI server mounting the 1TB
>> drive in
>> > > another machine. That drive developed non-fatal SMART errors, but it
>> was a
>> > > few years old, went through several power-outages with no UPS, and
>> was a
>> > > Seagate 1TB model known to have issues. I was able to pull off all
>> the data
>> > > on to a 2TB drive later, but we stopped using the 1 TB drive.
>> > >
>> > > Our XBMC/KODI server NFS mounted the drive, which was stored in a box
>> in
>> > > another room. This was how we stored our ripped movies for a good 1+
>> years.
>> > >
>> > >
>> > > Charles McColm, cr at theworkingcentre.org
>> > > http://www.theworkingcentre.org/cr/
>> > > Desk Phone: 519-743-1151 x121
>> > > Shop Phone: 519-743-1151 x225
>> > > Open Tues. - Fri. 10am - 5pm
>> > > ________________________________________
>> > > From: kwlug-disc [kwlug-disc-bounces at kwlug.org] on behalf of William
>> Park
>> > > via kwlug-disc [kwlug-disc at kwlug.org]
>> > > Sent: Wednesday, September 13, 2017 11:36 PM
>> > > To: kwlug-disc at kwlug.org
>> > > Cc: William Park
>> > > Subject: Re: [kwlug-disc] Adding storage to a rack mount server
>> > >
>> > > The cheapest option would be NFS.  Mount the desktop from 2U server.
>> > > $0.00 hardware cost.  Zero hardware change.
>> > > --
>> > > William Park <opengeometry at yahoo.ca>
>> > >
>> > > On Wed, Sep 13, 2017 at 03:20:42PM -0400, Colin Mackay wrote:
>> > > > Greetings.
>> > > >
>> > > > I have come into possession of a DL380 G6 2U server to replace the
>> > > desktop
>> > > > server I have at home.  The desktop has two internal, 3.5" 2TB SATA
>> > > drives,
>> > > > in a software raid 1.  Currently I have 8 2.5" 146GB SAS drives in
>> the
>> > > new
>> > > > server, but I'd like to increase space at as low a cost as possible.
>> > > >
>> > > > All I use the drives for are MythTV recordings and general storage
>> of
>> > > > pictures and documents.  Current usage is 1.1TB or 638GB without
>> Myth
>> > > > recordings. :)
>> > > >
>> > > > My options seem to be:
>> > > >
>> > > > 1. buying 2x 2.5" 2TB SATA drives
>> > > >   - About $250
>> > > >   - Probably most reliable option
>> > > >
>> > > > 2. Using my current two drives in a USB RAID1 device
>> > > >   - Cheaper, but...
>> > > >     - No idea which one to use, there are dozens of them.
>> > > >     - Not sure how I'd know if a drive failed
>> > > >
>> > > >
>> > > > I planned to use ESX on this server, so if I did go with USB
>> option, not
>> > > > certain of the reliability of mounting USB drives on a guest OS.
>> > > >
>> > > >
>> > > > Any thoughts, or suggestions out there?  Something I haven't
>> thought of?
>> > > >
>> > > >
>> > > > Thanks!
>> > >
>> > > > _______________________________________________
>> > > > kwlug-disc mailing list
>> > > > kwlug-disc at kwlug.org
>> > > > http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org
>> > >
>> > > _______________________________________________
>> > > kwlug-disc mailing list
>> > > kwlug-disc at kwlug.org
>> > > http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org
>> > >
>> > >
>> > >
>> > > _______________________________________________
>> > > kwlug-disc mailing list
>> > > kwlug-disc at kwlug.org
>> > > http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org
>> > >
>>
>> > _______________________________________________
>> > kwlug-disc mailing list
>> > kwlug-disc at kwlug.org
>> > http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org
>>
>> .
>>
>> _______________________________________________
>> kwlug-disc mailing list
>> kwlug-disc at kwlug.org
>> http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org
>>
>
> _______________________________________________
> kwlug-disc mailing list
> kwlug-disc at kwlug.org
> http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://kwlug.org/pipermail/kwlug-disc_kwlug.org/attachments/20170915/6aa016d2/attachment.htm>


More information about the kwlug-disc mailing list