<div dir="ltr"><div dir="ltr">On Tue, Oct 29, 2019 at 12:56 PM Benjamin Tompkins <<a href="mailto:bjtompkins@gmail.com">bjtompkins@gmail.com</a>> wrote:<br></div><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="auto">You may be better off skipping the hub and looking for an extension cable and putting the joint where the bend is.  </div></blockquote><div><br></div><div>The hub reduces the two cables from the two cameras on the telescope optical tube, to just one going to the laptop (instead of the current two. <br></div><div><br></div><div>Will try that after I measure the current.</div><div><br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="auto"><div dir="auto">As for the passive hub, USB 2.0 specifies a max amperage of 500mA.  It should provide that to a single port if that's all that is in use.</div></div></blockquote><div><br></div><div>Thanks for this info. Gives me a baseline to measure. <br></div></div><div class="gmail_quote"><br></div><div class="gmail_quote">The USB cable for the one camera is both power and data, and for the other camera is only data.</div><div class="gmail_quote"><br></div></div>