Start with ethtool, and see what it says:<br><br># ethtool eth0<br>Settings for eth0:<br>        Supported ports: [ TP ]<br>        Supported link modes:   10baseT/Half 10baseT/Full<br>                                100baseT/Half 100baseT/Full<br>
                                1000baseT/Half 1000baseT/Full<br>        Supports auto-negotiation: Yes<br>        Advertised link modes:  10baseT/Half 10baseT/Full<br>                                100baseT/Half 100baseT/Full<br>
                                1000baseT/Half 1000baseT/Full<br>        Advertised auto-negotiation: Yes<br>        Speed: 1000Mb/s<br>        Duplex: Full<br>        Port: Twisted Pair<br>        PHYAD: 0<br>        Transceiver: internal<br>
        Auto-negotiation: on<br>        Supports Wake-on: pg<br>        Wake-on: g<br>        Current message level: 0x00000037 (55)<br>        Link detected: yes<br><br>If you want to go the "add a PCI NIC" route, I have one that is 10/100.<br>
-- <br>Khalid M. Baheyeldin<br><a href="http://2bits.com">2bits.com</a>, Inc.<br><a href="http://2bits.com">http://2bits.com</a><br>Drupal optimization, development, customization and consulting.<br>Simplicity is prerequisite for reliability. --  Edsger W.Dijkstra<br>
Simplicity is the ultimate sophistication. --   Leonardo da Vinci<br>