[kwlug-disc] OT: JST cables

[Stuart Seeley]

Oh.. one trick I’ve done is just pull the pins out to solder then reinsert when cool...

Stuart

Sent from my iPhone

> On Jun 26, 2018, at 2:03 PM, Khalid Baheyeldin <kb at 2bits.com> wrote:
> 
> On Tue, Jun 26, 2018 at 1:50 PM, Andrew Kohlsmith (mailing lists account) <aklists at mixdown.ca> wrote:
>>> On Jun 26, 2018, at 12:49 PM, CrankyOldBugger <crankyoldbugger at gmail.com> wrote:
>>> My usual go-to places are KW Surplus (which would probably not have what you want in this case), Orion Electronics on Lancaster, and Sayal in Cambridge.  Neutron in Guelph is sometimes good, and they have an unusually complicated online catalogue…
>> 
>> For me I’ve had almost zero luck with local electronics parts outside of scrap/junk “parts bins” which are a lot of fun but incredibly frustrating if you need something specific.
>> 
>> Digikey will ship overnight for $8 (and free if you order over $100) and you get exactly what you need every time. Mouser claims to do this as well but generally I find it’s not as good a service, although the last couple of orders have been MUCH better.
>> 
>> The trick with both of these is finding the right part number. Throwing in "JST 2mm” into digikey’s search and narrowing the results down a bit yields this:
>> 
>> https://www.digikey.ca/product-detail/en/jst-sales-america-inc/B6B-PH-K-S-LF-SN/455-1708-ND/926615
>> 
>> and in the related parts you can get the female headers (455-1162-ND) and pins for the headers (455-2148-1-ND).
>> 
>> Alternatively, which is what I usually do now that I’m getting older and get frustrated with trying to crimp tiny pins, is to order pre-made cables (455-3083-ND). Sometimes you find them in different colours too.
> 
> I do have the required female connector and the pins for it. The seller of the motor included these.
> 
> But it is too tiny to attach wires too. We tried to place solder and melt it, in the hope the wire will bind to the solder and the pin, but that did not work. 
> 
> So was looking for female connectors which already has the wires pre-attached on them. 
> 
> _______________________________________________
> kwlug-disc mailing list
> kwlug-disc at kwlug.org
> http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://kwlug.org/pipermail/kwlug-disc_kwlug.org/attachments/20180626/1c8c8d41/attachment.htm>