[kwlug-disc] High Availability

Joe Wennechuk youcanreachmehere at hotmail.com
Thu Feb 20 11:15:47 EST 2014


Ha resources on the slave is ..
OSCAR-SLAVE 10.240.7.190 tomcat6 smartlabs inadyn MailTo::support at prylynx.com 

and on the master is ...
OSCAR-MASTER 10.240.7.190 tomcat6 smartlabs inadyn MailTo::support at prylynx.com 


----------------------------------------
> From: youcanreachmehere at hotmail.com
> To: kwlug-disc at kwlug.org
> Subject: RE: [kwlug-disc] High Availability
> Date: Thu, 20 Feb 2014 11:11:57 -0500
>
> I have just acquired an already set up customer. It appears that it is using heartbeat.
>
> haresources on both machines is ....
> OSCAR-MASTER 10.240.7.190 tomcat6 smartlabs inadyn MailTo::support at prylynx.com
>
> and the ha.cf is ....
> logfile /var/log/ha-log
> logfacility local0
> keepalive 2
> udpport 694
> bcast eth0 # Linux
> auto_failback off
> node OSCAR-MASTER
> node OSCAR-SLAVE
>
> OSCAR-MASTER IP is 10.240.7.191
> OSCAR-SLAVE IP is 10.240.7.192
>
> The slave has the ball because if I ifconfig on the slave I get the following that shows the slave is now IT.
>
> eth0 Link encap:Ethernet HWaddr 10:9a:dd:5b:a3:81
> inet addr:10.240.7.192 Bcast:10.240.7.255 Mask:255.255.255.0
> inet6 addr: fe80::129a:ddff:fe5b:a381/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:25668625 errors:0 dropped:0 overruns:0 frame:0
> TX packets:24503891 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:865187034 (865.1 MB) TX bytes:1338963431 (1.3 GB)
> Interrupt:21
>
> eth0:0 Link encap:Ethernet HWaddr 10:9a:dd:5b:a3:81
> inet addr:10.240.7.190 Bcast:10.240.7.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> Interrupt:21
>
>
>
> ----------------------------------------
>> Date: Thu, 20 Feb 2014 10:50:11 -0500
>> From: lists at alteeve.ca
>> To: kwlug-disc at kwlug.org
>> Subject: Re: [kwlug-disc] High Availability
>>
>> On 20/02/14 10:32 AM, Joe Wennechuk wrote:
>>> I have a High Availability cluster, and the slave has taken over. The master is back up, but failback is not on. Is there any command to force the failback to the master?
>>
>> What cluster stack? How is it configured? What is the current reported
>> state?
>>
>> --
>> Digimer
>> Papers and Projects: https://alteeve.ca/w/
>> What if the cure for cancer is trapped in the mind of a person without
>> access to education?
>>
>>
>> _______________________________________________
>> kwlug-disc mailing list
>> kwlug-disc at kwlug.org
>> http://kwlug.org/mailman/listinfo/kwlug-disc_kwlug.org 		 	   		  




More information about the kwlug-disc mailing list